How to Paint a BMX Bike? – [Everything Explained!]

Are you a BMX bike owner? Is your bike getting old? You probably want to give your old bike a new elegant look. So, what are you waiting for? Just follow my article. In this writing piece, I will provide you with all the information about how to paint a BMX bike.

At a time, your bike may get scratched or lose its shine. Moreover, your bike will lose its gracious beauty, and it looks pretty ragged. So this is the perfect time to paint your bike.

The best part is that it’s effortless to give your bike a new paint job. You can do it on your own and trust me; you will have great fun doing this. It will also cost-effective.

So, without any further ado, let’s get to know some excellent steps to paint your BMX bike:

How to Paint a BMX Bike?

At the very first, all you need is to make all the preparation. It would be best if you check that you have all the necessary materials with you. It would be best if you had some types of tools, a few spray paint, and your little time. Most importantly, you are ready with all your safety precautions.

Well, you are all prepared. Now follow the steps:

You will need:

  1. An old BMX bike of course
  2. Spray paints (Which color you like)
  3. Primer
  4. Sandpaper
  5. Allen wrenches
  6. Socket wrenches
  7. Masking tape
  8. Screwdriver
  9. Piece of stiff wire to hang the bike
  10. Clearcoat
  11. Finally, a clean place to work

Step 1: Collect all Materials for Painting

When you plan to start painting your bike, first make sure you check all the materials you need. Please create a list and collect them.

Step 2: Decide what color you want

You probably don’t want your bike to have a shiny glossy finish. So you can choose matte paint. Light blue, deep red, black, or a neon color will go best for your bike.

However, it entirely depends on your choice. Just follow some online stores and have a look at what types of spray paints they sell. Then you will have an idea about what you exactly want. If you like anyone, then go for that color. Hopefully, you won’t regret it.

Step 3: Separate the parts and frame

Well, you should do one more crucial thing before you start painting your bike. It would help if you took off the seat, chain, wheels, cables, and all other stuff that’s attached to your bike. And don’t lose the screws or any kind of stuff.

If you don’t know how to separate the parts from your bike, then you can seek help from your friend or any specialist. Otherwise masking tapes are another option. Just cover all the aspects with masking tapes which you don’t want to paint.

After you have removed all the parts, it’s also best to separate the frame apart. Take off the handlebars. Also, remove the front fork and pull out the seat post. This step helps to make your painting easier.

Step 4: Sanding

If you give paint directly on your bike, then the new color may not stay on the bike. Or the old color will be shown, and it will look not fair on your bike.

Use the finest grit sandpaper that removes the rust and scuffing the old paint from the surface quickly. You can use 180 grit sandpaper for a better result. But remember, you don’t need to remove all of the old paint. Just try to get most of the gloss off. Finally, you have to make sure you remove all the dust and grease from your bike.

Step 5: Go for Clean

This part is vital. If there is any dirt on your bike, then all your paintings can be ruined on your bike. So, clean them well and get rid of all the dirt surface, You can use a soft cloth to wipe off the bike with your hand. Make sure the bike is clean and as dust-free as possible.

Step 6: Primer

This step is not mandatory for painting a bike. But it surely will give you a better result. So, I will recommend you to must apply this step.

To priming the bike frame or other parts, you can use an aerosol primer. The primer will save your coats of paint. It would help if you had a piece of stiff wire to hang the bike. Then spray the primer from a distance of 15 Cm. be careful the wind won’t affect your primer.

Step 7: Paint

Finally, it’s time to apply the base coat. Once the primer dried up, you can start applying the color. At first, apply a thin layer of your spray paint to your first coat. Before applying the second coat, make sure you let it dry for about one hour. Now leave them to dry overnight. Then you can apply a clear coat.

While painting, always concentrates on a specific point. Do not move too fast, and do not move too slowly. Never apply any thick coats.

For a better result, please read the manufacturer’s instructions carefully.

Some Special Tips to Paint your Bike:

  • Wear shitty clothes. Stubborn paint can ruin your clean cloth.
  • Buy gloves. That will save your skin.
  • Don’t reattach the headlight portion of your bike.
  • Don’t overspray.
  • Never applied any thick coats.
  • Always read the instructions.
  • Put all the parts back on carefully at last.


As a newcomer, paint your BMX bike might be a little difficult for you. But now you don’t have to worry. Many of you don’t know how to paint a BMX bike. I have made the task easier for you with all the steps.

Hopefully, all techniques were helpful for you. And finally, you will also have a good looking bike that you will Love. Just follow the steps as mentioned.

If you have any further questions and any queries, please let us know in the comment section below. We will try to help you. Happy Painting.

FAQ On How To Paint BMX Bike

Can you spray paint a BMX bike?

Spray paint is a lot easier to use and lasts longer, as well. Make sure you get two or three cans of your base coat color and one can of your second color if you want a logo or pattern on top. Take apart your bicycle. The bike is much easier to work with if all of its parts are separate from each other.

What kind of paint do you use to paint a bike?

Paint for a bike? Most bikers use spray paint or airbrush paint when they want to paint their bikes, but not everyone does. Both are easy to use and can quickly coat your bike.

Is it hard to repaint a bike?

Bikes get scratched up and look a little rough. We are lucky because it is easy to give them a new paint job. You don’t need much more than a few tools, some spray paint, and some time. It’s all worth it, too, because the results make the bike look a lot better than it did before.

How many cans of spray paint does it take to paint a bike?

There isn’t enough paint in one can to paint a whole bike. With the right technique, a 400mL can of paint will cover most bikes’ frames and forks.

Can you hand paint a bike?

The good news is that you don’t have to pay a professional to make your bike look better. With the right tools and some time on your hands, you can paint a bike that looks like it was made by you.

Do you have to sand a bike before painting?

You’ll want to make sure that the frame is ready to be painted before you do this. If it’s not raw aluminum, steel, or carbon, give it a light sanding so the paint has something to stick to when it’s done painting it. Use sandpaper with 1,000 to 1,500-grits, and only rub enough to make the surface look rough. You don’t want to remove all of the material.

How can I paint my bike without taking it apart?

Step 1: Remove Rust Without Taking the Bike apart.
Step 2: Sand the bike frame.
Step 3:Clean the frame.
Step 4: Cover the parts of the room you aren’t painting.
Step 5: This is the last step. Hang the bike outside.
Step 6: Spray some paint.
Step 7: Dry the Bike.
Step 8: Take off the Bike Cover.

How much does a bike paint job cost?

There is a wide range of prices for custom paint jobs on motorcycles, but the price can go up or down depending on how much work is done. For high-end bikes and custom paint jobs that are really good, the price can go up to anywhere from $15,000 to $30,000.

How do you paint a rusty bike?

With steady, back-and-forth movements, spray 2-3 light coats of paint onto the bike while about 10″ away from the bike. Before or after an hour or 48 hours, spray on more coats of paint to get the best finish. After your last coat of paint has dried, don’t touch it for about 48 hours.

Can you spray paint a bike chain?

If you don’t have a lot of time, you could just clean the outside of the chain, but leave some lube in the joints. Then, you could spray paint the chain. The residual lube might keep the chain from “freezing,” but it would be hard to get good paint adhesion.

Can you powder coat a bike chain?

Putting powder on your chain is a good way to finish it because it can stand up to the weather and wear and tear. It can be painted in almost any color you want, even to match your company’s colors.

Know about the right brake pads for your BMX bike