How to Fix Mountain Bike Chain– 3 Steps That Will Work

You can’t expect your mountain bike chain to work perfectly every time you ride it. But if it doesn’t work when you need it, you could be in big trouble! 

Sometimes, fixing a bike chain can seem a bit like a complicated science experiment that only a few can understand. Well, this article explains all the steps to fixing a broken chain in a simple 3-step process.

We’ve all been there. You’re out riding your mountain bike, and it’s a beautiful day. You’ve got a great trail ahead of you. You have a good speed, and your gear is perfect. You take a turn, and everything goes well. Then, you’re approaching a tight turn, and you hit a bump or rock. Suddenly, your front wheel hits, and you get thrown off balance. You fall down, and your bike gets tangled up in the chain. You reach for the chain, but it’s too late. You’re in trouble.

In this article we’re going to show you the 3 step process that will allow you to troubleshoot any bicycle chain issue in no time. It’s easy!

Here are the 3 steps to repair your MTB chain

Step 1: Check for Loose Parts

A loose chain won’t stop a motorbike. A loose chain on a bicycle may cause a fall and get you injured. Loose parts can be dangerous, so check and tighten your chain often.

Don’t forget to check and tighten the chain of your bike before you ride. A loose chain can cause a fall and injure you or your loved one. This will not be easy if you don’t tighten the chain before you start riding. It’s better if you learn how to do this by yourself. It will be a lot easier if you go to a bike shop. Bike shops are places where people sell, repair and maintain bikes. 

Step 2: Lube the Chain

Once the chain is lubricated, you can run a finger along the top links to see if it needs more lube. You want to see a few beads of lubricant on the surface. If there’s none, you need to add a little bit. 

You should always use a proper amount of lubricant. Too much lubricant can cause the chain to rust and this will damage your chain. If the chain has been properly cleaned and the chain is free of rust, you shouldn’t need too much lubricant.

You can also test the chain to see if it needs more lubrication by running a finger along the links to see if they feel greasy or slippery. If there’s no lubrication on the surface, you can add some to the chain.

Step 3: Re-Assemble the Chain

If you’ve had to fix a problem on your bike and need help, you might be tempted to call in the professionals. But if you’ve ever had to put your bike back together, you know what a hassle that can be! This week, we’ll show you a few simple tips that will help you reassemble your own bike chain in just a few minutes.

If you have ever tried to put a broken bike chain back together, you know how hard it is. This makes it even more frustrating when you can’t find any instructions in the bike manual. You could also go to the website of the company that makes your bike. You can get all of the information you need there. It will tell you how to put the chain back together and what kind of tools you will need.

Final thoughts on fixing your MTB chain

In conclusion, the problem is that there is nothing wrong with your bike. It is not broken, so don’t fix it. You need to have a look at the actual cause of the problem. When a bike chain breaks, it is almost always because the derailleur is not working properly. The only thing you need to do is make sure that the derailleur is set correctly and the cable tension is adjusted. Once this is done, the bike chain will last for years and will be the envy of all your friends. To make this happen, it is essential that you learn how to fix a bike chain, as this is something that many people are unfamiliar with. I recommend this online course on how to fix a mountain bike chain, which is free to watch.

Leave a Comment