As an Amazon Associate, I earn from qualifying purchases.
I understand I’m going to have to replace my mountain bike no matter how well maintained I am. But considering there may be hundreds of dollars in a new mountain bike, I was just wondering how long a mountain bike should last?
What is a mountain bike’s average life?
A mountain bike can endure for over 20 years with proper maintenance. This duration depends heavily on where and how much you are riding. Some parts are wear-out, tires, chains, brake pads and railroads are not going to survive forever. Careful maintenance is all in longevity.
Average Lifespan of a Mountain Bike
Well, there is no single word answer to how long a mountain bike lasts, although your bike can perform optimally for up to 20 years if it is well maintained.
The longevity relies mostly on how much you bike and where. In the first few years, certain elements such as tires, chains, drivetrains and brake pads wear out.
They must therefore be replaced immediately to make your bike longer. In short, careful maintenance holds the key to longevity.
If you keep your bike open without a dilemma even during the rainy season, the chain gets rusty. Before you start your trial excursion, always check the tire pressure.
Make sure you periodically lubricate the chain, throughout the chain so that the lubricant does not reach the braking system. And finally, clean them for dirt or moisture after every travel.
In this next chapter, we will present essential aspects that influence the life span of the mountain bike as we read.
When Bike Components Start To Wear Out
- Tires – The wheels’ tires will eventually wear out due to continual abuse. Every ride involves hard braking and tough terrain, with the back tire usually being the first to go. In addition, punctures might reduce the tire’s durability.
- Chain – Pedaling puts a lot of strain on the chain, causing it to wear down and break. It normally only lasts a few months if you ride it frequently if it isn’t properly greased. The elements might rust and corrode the chain if it is too dry. A bad pedal stroke might also stretch the chain, reducing its performance.
- Drivetrain – While the drivetrain appears to be in good shape, it can wear down. Not properly lubricated or exposed to mud and wetness. Then it starts to wear out. The cassette and chain ring teeth can thin out and lose usefulness. The derailleur might also break due to being hit by rocks and other obstructions.
- Brake pads – Brake pads wear out when utilized, especially when travelling downhill. No matter if they are caliper, mechanical, or hydraulic, they will wear out.
- Grips – Just like the tires, the grips are rubber and constantly in contact with your hand, slowly thinning it. You can ride more comfortably and enhance your handling with them. The grips will get smaller with use, but you won’t notice.
- Frame – The frame is one of the bike’s most durable components. It’s the one that holds your bike together, therefore it needs to be strong. A broken frame can be fixed, but it’s best to get a new bike.
- Suspension – Constant riding can cause suspension seals to crack or wear out. Dirt and debris can enter the chambers and reduce performance. Proper maintenance keeps it from breaking, but it must be replaced.
When to Replace Bike Parts?
As previously stated, a mountain bike’s components will eventually wear out, reducing performance. Replace it when it starts to impede your riding pleasure.
To be safe, you must ride a bike with well-maintained components.
Tires, chain, and brake pads must be in peak condition to avoid an accident. Change them when they get worn out so you may still enjoy the ride and push it to its maximum.
The greatest way to extend the life of a mountain bike is to properly maintain it. Rust and dirt are major causes of it breaking. So clean your bike carefully after each ride. It’s also a good idea to replace any worn-out components to keep it performing at its best.